Tenco Hydro · Pump Stands & Pump Skids
Custom Pump Stands Built to Spec
Single, Duplex & Multi-Pump Skid Assemblies
From a single-pump pedestal to a fully automated 5-pump SCADA-ready skid — Tenco Hydro designs and fabricates pump stands engineered for your exact application. 304 stainless or carbon steel. Piping, controls, instrumentation, and accessories all in-house.
5
Configurations
C0–C4
Controls Levels
304SS
Stainless Option
60+
Yrs Experience
Pump Configurations
Choose Your Setup
Every pump stand starts with the right configuration. Tell us your pump count and duty requirement and we'll engineer the rest.
S1
Single
Single Pump Stand
One pump, one motor, base plate, and drain rim. The straightforward pedestal solution for simple pump applications.
S2 — Most Popular
Duplex
Dual Pump Stand
Two-pump duty/standby or parallel operation on a common base plate with interconnected manifold. Built for reliability.
S3
3–4 Pump
Multi-Pump Skid
Manifolded common suction and discharge headers with custom duty/standby configuration for 3 or 4 pumps.
S4
5+ Pump
Large Pump Station
Five or more pumps on an engineered manifold and base frame. Large-scale pump station design and fabrication.
CUST
Custom
Custom Configuration
Non-standard pump arrangement? Provide your pump count and layout and our engineers will handle the rest.
Interactive Configurator
Build Your Part Number
Select your options below to generate your PST part number. Share it with us when requesting a quote.
1 — Pump Configuration
2 — Stand / Skid Material
3 — Piping Material
4 — Controls Level
5 — Instrumentation (select all that apply)
6 — Accessories (select all that apply)
Your Part Number
PST-S1-CS-PVC-C0-NN
Config
S1 — Single Pump
Stand
CS — Carbon Steel
Piping
PVC — Schedule 80
Controls
C0 — No Controls
Instruments
None selected
Accessories
None selected
No commitment required · We respond within 2 business hours
What's Included
Built Right From The Start
Frame & Base Materials
- Carbon steel epoxy-painted base frame
- 304 stainless steel for wet or corrosive environments
- Welded drip tray / containment rim option
- Leveling feet standard on skid assemblies
- Forklift pockets on larger skids
Piping & Valves
- Schedule 80 PVC or 304SS suction & discharge
- Common suction/discharge manifold headers
- Isolation ball or butterfly valves per pump
- Swing or ball check valves on discharge
- Unions or flanged connections for serviceability
Controls & Panels
- C0: Field wiring only — no panel
- C1: Local motor starters + HOA switches
- C2: VFDs + level-based auto alternation
- C3: Level-based auto start/stop + dry-run lockout
- C4: Full automation + SCADA-ready Modbus/Ethernet
Instrumentation
- Radar level transmitter (4–20 mA output)
- High level float or probe switch
- Low level switch for dry-run protection
- Pressure gauges — suction & discharge
- Mag or ultrasonic inline flow meter
Industries Served
- Municipal water & wastewater
- Industrial process & manufacturing
- Food & beverage processing
- Chemical & oil/gas service
- DAF pressurization & recycle systems
Engineering & Services
- Customer-approved CAD drawings before build
- 304SS welding & in-house fabrication
- PE stamps available — all 50 states
- UL, SS, and C1D1/C1D2 rated panels
- Installation & commissioning services
Controls Options
From Basic Starters to Full SCADA
Choose the controls level that fits your application — from simple field wiring to a fully automated, remotely monitored pump station.
Code
Level
What's Included
Complexity
C0
No Controls
Field Wiring Only
Motors wired to terminal block — no panel, no starters, no VFDs.
All controls and power switching are provided by others in the field. Typical when an existing MCC or customer panel will handle pump operation.
Basic
C1
Motor Starters
+ HOA Switches
Local panel with a magnetic motor starter and Hand-Off-Auto switch per pump.
Hand runs the pump manually; Auto enables start from an external signal (float, level switch, or remote). No VFD — pumps operate at fixed line speed.
Basic
C2
VFDs
+ Auto Alternation
VFD on each pump commanded by a dedicated pump controller reading a 4–20 mA level signal.
Controller sends analog speed commands to the active VFD and automatically alternates duty/standby pumps at programmed level setpoints, balancing runtime across all pumps. HOA switches included for manual override.
Intermediate
C3
Level-Based
Pump Control
All C2 features plus fully automatic level-based start/stop using a continuous level transmitter.
Pumps auto-start on high-level setpoint and stop on low-level setpoint. Includes dry-run low-level lockout to protect pumps and a high-level alarm relay for notification. No PLC required.
Advanced
C4
Full Automation
+ SCADA Ready
All C3 features plus remote I/O, per-pump runtime tracking, and network communications for SCADA or BMS integration.
Includes remote start/stop dry-contact inputs, run status and fault alarm outputs, per-pump runtime hour counters for maintenance scheduling, and Modbus RTU or Ethernet TCP/IP for connection to plant SCADA, DCS, or BMS.
SCADA Ready
Ready to Spec Your Pump Stand?
Our engineers are ready to review your application and build a pump stand that fits your space, your process, and your budget. No guesswork — we've done this for 60+ years.
Request a Quote
Tell Us About Your Project
We'll Get Back to You Within 2 Business Hours
Use the configurator above to generate your part number, then share the details here. Not sure what you need? Just describe your application — we'll help you spec the right pump stand.
Phone
708-387-0700
Location
720 N Heartland Dr Unit K, Sugar Grove, IL 60554
Hours
Mon–Fri, 7:00 AM – 5:00 PM CT
Specialties
304SS fabrication · In-house welding · PE stamps available