Belt Skimmer Configurator
Choose the best features for your application
1
Belt Width
▶
Select belt width. Wider belts recover more oil per pass. 12" is the most common industrial selection.
TS-6
6" Belt Width
Compact; low-flow or tight installation spaces
TS-12 Standard
12" Belt Width
Standard industrial; most common selection
TS-18
18" Belt Width
High oil volume; large OWS or DAF surface
TS-24
24" Belt Width
Maximum recovery rate; wide tank or lagoon surface
2
Belt Material
▶
Select oleophilic belt material based on oil type.
M1 Standard
Nitrile (NBR)
Standard for petroleum-based oils; diesel, hydraulic fluid, motor oil
M2
PVK (PVC–Polyvinyl)
Vegetable oils, biodiesels, and food-industry applications
3
Extension Stand
▶
Select the mounting stand configuration.
ES Standard
Standard Extension Stand
Standard height; included with unit
ES0
No Extension Stand
Mount to existing structure or tank edge
CSXX
Custom Extension Stand Height
Custom height; replace XX with height in feet (e.g. CS06 = 6 ft)
4
Controls
▶
Select belt drive controls tier.
C0
No Controls
Belt drive for field wiring only
C1
On/Off Switch
Simple local on/off switch
C2 Standard
Timer (120V)
Cyclic timer for intermittent operation
C3
3-Phase Starter
3-phase motor starter; manual
C4
3-Phase Starter + Timer
Starter with integrated automatic cycling timer
C5
VFD / Variable Speed
Adjustable belt speed for optimized recovery
5
Transfer Package
▶
Select oil transfer system for collected oil.
TP0
No Transfer Package
Belt skimmer only; no oil transfer
TP1
Pump Only
Transfer pump; no tank or strainer
TP2 Standard
Pump + Tank
Transfer pump and oil collection tank
TP3
Pump + Tank + Strainer
Pump, collection tank, and inlet strainer
TP4
Pump + Tank + Strainer + Concentrator
Full transfer with polishing/concentrator stage
6
Heated Trough
▶
Select heated trough option. Required for high-FOG or cold-climate service.
HTT
Tenco-Provided Heating
Heated oil collection trough; Tenco hot water heating system
HTP
Plant-Provided Heating
Heated trough; plant-provided hot water supply
7
Pump Controls (Optional)
▶
Select pump controls options. Multiple selections allowed.
Transfer Pump Controls
PC
Standard Pump Controls
Basic pump motor starter and controls for transfer pump
Z1
Alarming
Alarm output for oil level or fault conditions
Z2
PLC Interface
PLC communication interface for remote monitoring
Services
Install
Installation Services
Tenco Hydro field installation and commissioning
Request a Quote
Engineers Respond Within 2 Business Hours
Complete the configurator above to auto-fill your part number, then describe your application below.
Request Received!
A Tenco Hydro engineer will follow up within 2 business hours.
Questions? Call 708-387-0700.